A2 Crown
12mm Corridor Progressive New Design
A2 Vision Technologies provide new generation of progressive short corridor design - super-short corridor 12mm "Crown". The fitting cross is 2mm above the optical center and the recommended fitting height is 15mm.
Benefits of the design:
New cutting method of ceramic block provides the high precision of the mold. Following the tradition of A2 Vision design, the distance zone is clear and wide. The peripheral aberration moved inside of the functional areas of the lens. The new aspherical solution maximizes the width of the corridor area, unlike conventional short corridor progressive design.
Gradual translate of the central line from the corridor to the reading zone leads to the wide clear reading zone - the best solution for the super-short frames.
The design gets full addition power in the 12mm corridor length.
Cylinder Map
Power Map
.jpg)
Corridor section
.jpg)
Technical Data
| Diopter | mm | |
| Distance Width (2mm above MRP) | 0.5D 1.0D |
9.2mm 16.5mm |
| Distance Width (8mm above MRP) | 0.5D 1.0D |
30mm clear |
| Maximal nasal Astigmatism | -2.60D | |
| Minimum Corridor Width | 0.5D 1.0D |
4.8mm 8.8mm |
| Near Vision Width (12mm below MRP) | 0.5D 1.0D |
14.2mm 21.8mm |
| Fitting Cross (above MRP) | 2.0mm | |
| Start of progressive (above MRP) | 2.0mm | |
| End of progressive (above MRP) | 12mm | |
| Minimum Fitting Height | 15mm |
* Measured on base 4.50 addition 2.00D
Mold Availability
| Bases | 2.50 4.50 6.50 8.50 |
| Additions | 0.75 to 3.50 in 0.25D |
| Refractive Indexes | 1.498 1.56 1.60 1.67 |
Possibility to produce by Free-form machines and insert for polycarbonate.
Marking dimension
.jpg)
A2 Kids
10mm Corridor Progressive Lens Design
A2 Kids is an extremely short corridor progressive lens design, especially developed to slow the unique genetic myopia common among children throughout Southeast Asia. Allowing quick adjustment, A2 Kids reduces the effort required by the eye muscle to focus on up-close vision. A wide reading zone enables a child to read a full page at a glance.
A2 Kids is specifically designed for small children's frame, with lower and fewer peripheral cylinders than in traditional progressive designs. With less peripheral blur and a very soft design, A2 Kids is the ultimate solution for a child's active lifestyle.
A2 Kids is specifically designed for small children's frame, with lower and fewer peripheral cylinders than in traditional progressive designs. With less peripheral blur and a very soft design, A2 Kids is the ultimate solution for a child's active lifestyle.
Power Map Cylinder Map
.jpg)
View Big Map View Big Map
Technical Data
| Diopter | mm |
|
| Distance Width (2mm above MRP) |
0.5D
1.0
|
6.5mm
12.3m
|
| Distance Width (8mm above MRP) | 0.5D 1.0D |
28.5mm Clea |
| Maximum Nasal Astigmatism | -3.0mm | |
| Minimum Corridor Width | 0.5D 1.0D |
5.5mm
10.2mm
|
| Corridor Width (10mm bellow MRP) | 0.5D 1.0D |
10.3mm 16.6mm |
| Corridor Width (11mm bellow MRP) | 0.5D 1.0D |
12.4mm 18.5mm |
| Fitting Cross (above of MRP) | 2.0mm | |
| Start of Progressive (above of MRP) | 2.0mm | |
| End of Progressive (bellow of MRP) | 10mm | |
| Minimum Fitting Height | 13mm |
Prescription Range
| Mold Nominal Base Curve | Mold Radius (RCX) |
| 1.00 | 530.00 |
| 2.50 | 242.01 |
| 3.50 | 142.9 |
Mold Availability
| Bases | 1.00, 2.50, 3.50 |
| Addition Powers | 1.5 1.75 |
| Refractive Indexes | 1.56, 1.60, 1.67 |
A2 ProVision
17mm Corridor Progressive Lens Design
A2 ProVision is the ultimate all-purpose progressive lens design for any base or addition. Especially designed for quick adjustment, A2 ProVision enables smooth transition from far to near vision, as well as clear vision at medium range.
A2 ProVision offers an all-aspheric, soft lens design with an exceptionally wide distortion-free area for every vision zone and reduced vertical prismatic levels in the entire lens area. The design is best suitable for large frames.
* Measured on base 4.00 addition 2.00
A2 ProVision offers an all-aspheric, soft lens design with an exceptionally wide distortion-free area for every vision zone and reduced vertical prismatic levels in the entire lens area. The design is best suitable for large frames.
Power Map Cylinder Map
Technical Data
| Fitting Cross (above of MRP) | 2.0mm |
| Distance Circle (above of MRP) | 8.0mm |
| Near Area Circle | 17.0mm + 8° down to center and side |
| Corridor Width | 7.0mm (1.0 diopter scale |
| Addition Area Width | 18.00mm (1.0 diopter scale) |
| Maximum Nasal Astigmatism | No more than addition |
Prescription Range
| Mold Nominal Base Curve | Mold Radius (RCX) |
| 2.50 | 193.90 |
| 4.50 | 125.95 |
| 6.50 | 84.60 |
| 8.00 | 68.75 |
Mold Availability
| Bases | 2.50, 4.50, 6.50, 8.00 |
| Addition Powers | 1.00 to 3.50 in 0.25D steps |
| Refractive Indexes | 1.498, 1.56, 1.60, 1.67, 1.586 (PC) |
A2 Edge
14mm Corridor Progressive Lens Design
A2 Precise is a cutting-edge, short corridor progressive lens design for freeform manufacturing processes. With maximal accuracy and stable base curve, A2 Precise allows for extremely smooth transition from far to medium to near vision at a minimal adjustment period.
A2 Precise offers an all-aspheric, asymmetric, soft lens design with exceptionally low astigmatism in all vision zones and an ultimate gradual central line. The design is suitable for a variety of frame sizes, allowing the user to enjoy both advanced progressive lenses and a trendy small frame.
A2 Precise offers an all-aspheric, asymmetric, soft lens design with exceptionally low astigmatism in all vision zones and an ultimate gradual central line. The design is suitable for a variety of frame sizes, allowing the user to enjoy both advanced progressive lenses and a trendy small frame.
Power Map Cylinder Map
Technical Data
| Diopter | Mm | |
| Distance Width (2mm above MRP) | 0.5D 1.0 |
8.4mm 13.5mm |
| Distance Width (8mm above MRP) | 0.5D 1.0D |
33.2mm
Clea
|
| Reading Zone Width (12mm below MRP) | 0.5D 1.0D |
10.4mm
15.0mm
|
| Reading Zone Width (14mm below MRP) | 0.5D 1.0D |
12.5mm
16.6mm
|
| Corridor Width | 0.5D 1.0D |
3.7mm 7.9mm |
| Iso-Astigmatism Nasal Side | 0.5D 1.0D |
10.1mm 7.8mm |
| Iso-Astigmatism Temporal Side | 0.5D 1.0D |
9.3mm 5.2mm |
| Fitting Cross (above of MRP) | 2.0mm | |
| Decentration | 3.0mm | |
| Minimum Fitting Height | 16.5mm |
| Prescription Recommended | -10.0 to 6.00D |
| Nominal Base Curve | 1.50, 3.00, 4.50, 6.00, 7.50 |
Mold Availability
| Bases | 1.50, 3.00, 4.50, 6.00, 7.50 |
| Addition Powers | 0.75 to 3.50 in 0.25D steps |
| Refractive Indexes | 1.498, 1.56, 1.60, 1.67, 1.74, 1.586 (PC) |
A2 Magic
14mm Corridor Progressive Lens Design
A2 Magic is the ultimate short corridor progressive lens design with the widest far vision zone in the market. Enabling smooth transition from far to near vision, as well as clear vision at medium range, A2 Vision is quick and easy to get accustomed to.
A2 Magic offers an asymmetric, aspheric soft lens design with a minimum fitting height of only 17 millimeters. The design is, therefore, suitable for a variety of frame sizes, allowing the user to enjoy both advanced progressive lenses and a trendy small frame.
* Measured on base 4.00 addition 2.00
A2 Magic offers an asymmetric, aspheric soft lens design with a minimum fitting height of only 17 millimeters. The design is, therefore, suitable for a variety of frame sizes, allowing the user to enjoy both advanced progressive lenses and a trendy small frame.
Power Map Cylinder Map
Technical Data
| Diopter | Mm | |
| Distance Width (2mm above MRP) | 0.5D 1.0 |
10.4mm
Clear
|
| Distance Width (8mm above MRP) |
0.5D
1.0D
|
23.0mm
Clear
|
| Height of Iso-Astigmatism Line |
0.5D
1.0D
|
6.8mm
5.5mm
|
| Reading Zone Width (14mm below MRP) |
0.5D
1.0D
|
8.3mm
14.0mm
|
| Maximum Nasal Astigmatism | -2.5mm | |
| Corridor Width |
0.5D
1.0D
|
4.6mm
8.7mm
|
| Fitting Cross (above of MRP) | 2.0mm | |
| Start of Progressive (above of MPR) | 2.0mm | |
| Progressive (below of MRP) | 14.0mm | |
| Minimum Fitting Height | 17mm |
Prescription Range
| Mold Nominal Base Curve | Mold Radius (RCX) |
| 2.50 | 193.90 |
| 4.50 | 125.95 |
| 6.50 | 84.60 |
| 8.00 | 68.75 |
Mold Availability
| Bases | 2.50, 4.50, 6.50, 8.00 |
| Addition Powers | 1.00 to 3.50 in 0.25D steps |
| Refractive Indexes | 1.498, 1.56, 1.60, 1.67, 1.586 (PC) |